HomeMy Public PortalAboutGulfstream Sample Light
Renee Basel
From:Tony Plonner <tplonner@lightingdynamics.com>
Sent:Monday, March 3, 2014 9:23 AM
To:dbrannon@bngengineers.com
Cc:Michael, Imparato (mimparato@beaconproducts.com)
Subject:Gulfstream Sample Light
Dear Danny:
Here is a quick way to reduce the light output of the sample fixture. This comment is from the engineer at Beacon:
“Two drivers in the fixture.
Disconnect one driver and move the engine wires to the other driver, that way you’ll get 27W fixture.”
Also, I am awaiting on information as t dimming the fixture. Beacon does not recommend putting the frosted lenses in.
One recommendation would be to eliminate the lenses, as they are not really required with the LEDs. We do that quite
often so we still have the same appearance, without the maintenance required cleaning lenses, etc.
Going to a 3000K color temperature reduce the light output about 15%. I could bring a 3000K demo lamp to you so they
could see the difference in color temperature. Please let me know if you need one.
Finally, my experience has been, when people are evaluating any type of light fixture, indoors or outdoors, they are
focusing on the fixture, looking directly at it, etc. I commonly get comments about the brightness, etc., but when fixtures
are in normal use, people usually do not pay that much attention. If we were still using a metal halide or HPS option, and
people looked at the fixture, they would probably still complain about “glare”.
Regards,
__________________________
Tony Plonner, CPMR
Principal
Lighting Dynamics inc.
7835 W Commercial Blvd.
Tamarac, FL 33351
O: (954) 944-0223
M: (561) 718-8917
F: (954) 763-1503
Main: 954-944-0286
tplonner@lightingdynamics.com
LightingDynamics
www..com
Passionate • Professional • Proficient
________________________
Follow us on Social Media:
1
2