HomeMy Public PortalAboutFW_ Gulf Stream Prints
Renee Basel
From:John Zoerhof <jzoerhof@HYPOWERINC.COM>
Sent:Tuesday, March 18, 2014 3:19 PM
To:Danny Brannon (DBrannon@BnGEngineers.com)
Cc:Cliff Spitzer
Subject:FW: Gulf Stream Prints
Good afternoon Danny,
Can you clarify the discrepancy below? Without a splice box the pull will be around 800’
Thanks,
John Zoerhof
Division Manager – Power Services
From: Cliff Spitzer
Sent: Tuesday, March 18, 2014 2:16 PM
To: John Zoerhof
Subject: Gulf Stream Prints
In reviewing FPL plans and specifications to installing transformer pads noticed a difference between the supplemental
plans that the job was laid out .
On sheet F24 of the supplemental plans does not show a 48” splice box between the transformer locations .
The Prints Plans and specifications on sheet AO5R179 shows a splice box?
Thanks,
Cliff Spitzer
Project Engineer
O: 954.935.8606
C: 954.445.5133
954.978.9300 – Main 954.978.8666. - Fax
Please consider the environment before printing this e-mail
NOTICE: This email is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt
from disclosure. If the reader of this email is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are
hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately
notify us by telephone and return the original message to us at the listed email address. Thank You.
1
2