Loading...
Water Servcie Permit Application14400 S. Coil Plus Drive, Plainfield, IL 60544 Phone (815) 439-2937 Fax (815) 609-6114 building@goplainfield.com Page | 1 4/16/19 Water Service Permit Application ADDRESS: ____________________________________________________________ Zoning: ________ Subdivision: ________________________________________ Flood Plain: Yes No Service Line Size: ____________________ Estimated Value: $ ___________________ Water Meter Size: _____________________________ Plumbing Contractor: ______________________ Water/Sewer Contractor: ______________________ Who do we contact when permit is ready?_____________________________________ OWNER: GENERAL CONTRACTOR: Name:_____________________________________ Contractor:_______________________________ Street: ___________________________________ Street: ___________________________________ City, State, Zip: ____________________________ City, State, Zip: ___________________________ Cell: _____________________________________ Cell: ____________________________________ Phone: _________________________________ Phone: ___________________________________ Email: ____________________________________ Email: __________________________________ IDPH Plumbing Ordinance Number 0216-815-0005 All new water services or replacements shall be a minimum of 1 inch type K copper with flair joints from Buffalo Boxes to flare full port shut off valves. Water service pipe greater than three (3) inches in diameter shall be ductile iron water main and fittings and shall be buried to a depth of not less than five (5) feet below grade from the “B” box to the riser for water meter attachment. Water distribution piping inside buildings shall be type “K” (soft) copper when underground, and type “L” (hard drawn) copper when above ground with sweat fittings. No type “M” copper shall be allowed for potable water piping. Valves are required on each side of the water meter. A full port gate or ball valve shall be used. A drain down valve shall also be installed after the water meter and before the second shut off valve. I hereby declare that the above and attached information is correct and agree, in consideration of and upon issuance of a Building & Use Permit, to do or allow to be done only such work herewith applied for, and that such premises and its existing and proposed buildings or structures shall be used or allowed to be used for only such purposes as are set forth above or other uses permitted in the district. ___________________________________ _____________________________________ Owner’s Signature (required) Contractor’s Signature (required) Issued By: _________________________________ Date: ____________________ Building Official