HomeMy Public PortalAboutResolutions-2006-39NOY 6
ZHU 4:IDFM HAKI-rtLuLiIuN
CITY OF TIFFIN IOWA RESOLUTION NO 2006- 410
11U-U�1;3 r• i
A RESOLUTION AMENDING CITY DESIGN STANDARDS SECTION
7.H.5 REGARDING APPROVED WATER SERVICE LINE MATERIALS
WHEREAS, the City of Tiffin, Johnson County, Iowa desires to amend the City
of Tiffin Design Standards,
NOW, THEREFORE, BE IT RESOLVED, by the City of Council. of Tiffin, Iowa, that it
hereby amends the City of Tiffin Design Standards by removing Section 7.H.5 and
replacing it to read as follows:
Service pipe must be either seamless annealed copper, Type K conforming to ASTM B-
88 or P.E. 3408 as defined in current ASTM D2239 and AWWA C901 P.E. 200 psi. rated
pipe. See Figure 7.3 for typical water service installation.
ON THE 8a' day of November, 2006 at a regular meeting of the Tiffin City Council,
Tiffin, Iowa, Councilperson n I S introduced, A RESOLUTION
AMENDING CITY DESIGN STANDARDS SECTION TH.5 REGARDING
APPROVED WATER SERVICE LINE MATERIALS, and made a motion for approval.
The motion was seconded by Councilperson4
Ayes: INV i c, h IL -P4,, eve
Nays:
Kfo n e
Motion carried
WHEREUPON, Mayor Glenn R. Potter declared that the RESOLUTION AMENDING
CITY DESIGN STANDARDS SECTION 7.H.5 REGARDING APPROVED WATER
SERVICE LINE MATERIALS, be adopted and signified his approval of the same by
affixing his signature thereto.
PASSED, by the council on the 8' day of November, 2006 and approved by the Mayor
on the 8* day of November, 2006
CITY OF TIFFIN
By: yI�
Glenn R. Potter, Mayor
7ia-4-u
argaz B ihman, City Clerk
Nov. 8. 2006 4:25PM HART—FREDERICK
Addition to -City of Tiffin Design Standards
November 08, 2006
Water Distribution
Section 7.H.S.
Remove and replace with the following:
No,6979
Service pipe must be either seamless amealed copper, Type K conforming to ASTM B-88, or
P.E. 3408 as defined in current ASTM D2239 and AWWA C90I P.E. 200 psi. rated pipe. See
Figure 7.3 for typical water service installation.
P
e