HomeMy Public PortalAbout10-0148 Johnson CITY OF TYBEE ISLAND
BUILDING PERMIT
DATE ISSUED: 03 -30 -2010 PERMIT #: 100148
WORK DESCRIPTION REPLACE 9 WINDOWS
WORK LOCATION 8 FOURTEENTH ST APTS
OWNER NAME MARIAN H. JOHNSON
ADDRESS PO BOX 1565
CITY, ST, ZIP TYBEE ISLAND GA 31328 -1565
PHONE NUMBER
CONTRACTOR NAME WINDOW WORLD OF SAVANNAH
ADDRESS 2708 LEGION DR
CITY STATE ZIP THUNDERBOLT GA 31404
FLOOD ZONE
BUILDING VALUATION
SQUARE FOOTAGE
OCCUPANCY TYPE P
TOTAL FEES CHARGED $ 46.00
PROPERTY IDENTIFICATION #
PROJECT VALUATION $3,200.00
TOTAL BALANCE DUE: $ 46.00
It is understood that if this permit is granted the builder will at all times comply with the zoning, subdivision, flood control, building, fire,
soil and sedimentation, wetlands, marshlands protection and shore protection ordinances and codes whether local, state or federal, including
all environmental laws and regulations when applicable, subsequent owners should be informed that any alterations to the property must be
approved by the issuance of another building permit. Permit holder agrees to hold the City of Tybee Island harmless on any construction
covered by this permit.
This permit must be posted in a conspicuous location in the front of building and protected from the weather. If this permit is not posted
work will be stopped. The building contractor will replace curb paving and gutter broken during construction. This permit will be voided
unless work has begun within six months of the date of issuance.
Signature of Building Inspector or Authorized Agent: p IC&
P. 0. Box 2749 - 403 Butler Avenue, Tybee Island, Georgia 31328
(912) 786 -4573 - FAX (912) 786 -9539
www.cityoftybee.org
I /0 0 ----,
City of Tybee Island • Community Development Dept. r ■ + 40
J
Inspection Report
4
.
403 Butler Ave. • P.U. Box 2749 • Tybee IsJand GA 31323 gg.tat' r
—. Phone 912.736.4573 ext. 114 • Fax 912.736.9539 ,c.eX .•:
--•,, .......... _.
Perm r) I it No. i D" — r LD - .. Date Requested "<„ 4.7 0
Owner's Name \L4-113:: Date Needed
Gen. Contractor Subcontractor ) jUi N.), t ‘30,L74.."
Contact Information al 1
Project Address 44 ' , s .•.;- --'"^ '-- q -4 - \
)1 7 l' "i"r" .7 , .) .. .4 _. 2 ' ) `" / 14 -1>(1 '
Scope of Work ,
,.,
,-
inspector lig Date of Inspect /
ion r' <
/vA8,
Inspection t'f,17,0 it---r - i - • 1 / N3 (--1 - Pass 0 --fti Fee
'../
Inspection Pass ri Fail 0 Fee
1.....1
— -
......
Inspection Pass El Fail 0 Fee
Inspection Pass Fail Fee
OM. & ` ,CY'�FE /S
RESOURCES � ♦ � G�
•
GEORGIA ���
Permit Acknowledgement of
Asbestos /Environmental Notification to Georgia EPD for
Projects Involving Demolition, Wrecking, or Renovation
The undersigned hereby acknowledges that the issuance of this permit does not in any way grant
permission to the owner, owner's representative, or permit holder to proceed with demolition,
wrecking, or renovation of a structure prior to the filing of any required ten (10) day "Project
Notification for Asbestos Renovation Encapsulation or Demolition" form in accordance with
the Georgia Asbestos Rules. The Georgia Environmental Protection Division administers the
rules. In most cases, the rules require both the owner and the involved contractors to assure the
portion of the building involved in the project is thoroughly inspected by an Accredited Asbestos
Inspector for materials that contain asbestos; and the removal of the asbestos before renovation,
wrecking, or demolition begins almost without exemption. Georgia EPD requires a completed
demolition notification from be submitted 10 workings days in advance even if no asbestos is
present in the building. Further guidance for regulatory compliance and contact telephone
numbers are provided by the brochures entitled Asbestos & Renovation and Asbestos and
Demolition. Other environmental issues such as asbestos removal techniques, lead abatement,
ground contamination, or unusual site conditions may have EPD regulations that could affect the
project.
»ki / ��—
Undersigned Date
Printed Name
Office Use Only:
Project Address:
Permit Number:
-" TO S 0 A)
DP Rating: SS PSF to MPH Calculator - Ta,_, i3 milts Summary
Width: 35
How f erformance I!I Glass I Grid/ Muntin 1 Instaitation I Troub a hootinsi I Information 1 Links 1
Model Width Height DP Air Water Load FBC TDI Description Report #
04S4 60 60 65 <0.01 9.75 +/- 97.5 9834 Standard 64902.02
0454 36 72 60 <0.01 9.75 +1- 90 9834 Standard 64902.02
0604 96 55 55 < 0.01 12.00 +/- 82.5 9834 Standard (3/16" Annealed) 66596.02
0604 55 96 55 < 0.01 12.00 +/- 82.5 9834 Standard (3/16" Annealed) 66596.02
0604 60 60 55 0.01 6.00 +/- 82.5 9834 Standard (5/32" Annealed) 66596.02
0604 48 72 70 0.01 6.00 +/ -105 9834 Standard (5/32" Annealed) 66596.02
0704 36 72 55 <0.01 9.75 +/- 82.5 9834 Standard 64053.02
01HP 36 72 55 0.11 8.25 +/- 82.5 10453 Standard 71114.06
0104 36 72 55 <0.01 9.75 +/- 82.5 9834 Standard 64053.02
0201 36 60 55 0.21 9.00 +/- 845 8134.1 WIN - 547 No Stile Reinforcement 62609.02
1204 52 84 55 <0.01 8.25 +90/ -82.5 8135 WIN -882 HP with 3/16" Annealed 72442.01
1204 84 52 55 <0.01 8.25 +90/ -82.5 8135 WIN -882 HP with 3/16" Annealed 72442.01
i204 52 84 55 <0.01 8.25 +1 82.5 8135 WIN - 888 ASTM Impact 70201.02
i204 84 52 55 <0.01 8.25 +1- 82.5 8135 WIN-8:: ASTM Impact 70201.02
0404 60 60 65 <0.01 9.75 +/- 97.5 9834 Standard 64902.02
0404 36 72 60 <0401 9.75 +/- 90 9834 Standard 64902.02
0501 36 60 60 0.20 9.00 +/- 90 8134 WIN -531 No Stile Reinforcement 64875.02
B501 36 60 60 0.20 9.00 +/- 90 8134 WIN -531 No Stile Reinforcement 64875.02
11501 36 60 60 0.20 9.00 +/- 90 8134 WIN -531 No Stile Reinforcement 64875.02
07HP 36 72 55 0.11 8.25 +/- 82.5 10453 Standard 71114.06
1970 52 78 60 <0.01 9.00 +/- 90 8135 WIN -894 HP with 3/16" Annealed 72443.01
1970 78 52 60 <0.01 9.00 +1- 90 8135 WIN -894 HP with 3/16" Annealed 72443.01
1970 52 78 60 <0.01 9.00 +/- 90 8135 WIN -893 ASTM Impact 70197.02
1970 78 52 60 <0.01 9.00 +/- 90 8135 WIN -893 ASTM Impact 70197.02
1971 36 78 55 0.09 8.25 +/- 82.5 8124 HP with 1/8" Annealed 71813.02
1971 36 78 55 0,09 8.25 +/ -105 8124 WIN -889 ASTM Impact 68507.02
S140 36 72 55 0.11 8.25 +/- 82.5 10453 Standard (HP) 71114.06
S144 36 72 55 0.11 8.25 +/- 82.5 10453 Standard (HP) 71114.06
S146 36 72 55 0.11 8.25 +/- 82.5 10453 Standard (HP) 71114.06
http: / /www.associatedmaterials. net /Docs/DP Ratings/DP Lookup /Alside / Alside DP_Loo... 3/25/2010